Dr. Hahn
Hinges
Dr. Hahn VL-Band AT Concealed Hinge
Completely concealed inside flush aluminum door profiles, the VL-Band AT leaves no trace on the outside when the door is closed. It can be adjusted steplessly in 6 directions with the door hung; two hinges carry a leaf of up to 180 kg.
- Load Capacity
- Door weight up to 180 kg (with two hinges, depending on the profile)
- Horizontal Adjustment
- ±4 mm
- Height Adjustment
- ±4 mm
- Gasket Compression Adjustment
- ±1.5 mm
- Adjustability
- Stepless in 6 directions, with the door hung
- Opening Angle
- Up to 105°; 100% of the passage width can be used
Product Details
Dr. Hahn VL-Band AT Concealed Hinge
Developed by Dr. Hahn for flush aluminum doors, the VL-Band AT is a concealed hinge system in which the hinge body stays completely inside the profile. When the door is closed, no mechanical detail is visible on the facade.
On Pivotal panel doors we choose this hinge for its high load capacity and precise adjustment. Horizontal, vertical and gasket compression adjustments are made steplessly with the door hung, so the leaf is easily aligned after installation.
At a maximum opening angle of 105°, the full width of the door is available for passage. The hinge has been tested to EN 1935 with hinge grade 13: 200,000 opening and closing cycles and high corrosion resistance.
- Stepless adjustment: Horizontal, vertical and gasket compression adjustments are made with the door hung.
- Fully concealed installation: The hinge body stays inside the profile; invisible when the leaf is closed.
- Clear passage: At 105° opening, the full width of the door can be used.
Certifications: EN 1935
Technical specifications
- Load Capacity
- Door weight up to 180 kg (with two hinges, depending on the profile)
- Horizontal Adjustment
- ±4 mm
- Height Adjustment
- ±4 mm
- Gasket Compression Adjustment
- ±1.5 mm
- Adjustability
- Stepless in 6 directions, with the door hung
- Opening Angle
- Up to 105°; 100% of the passage width can be used
- Certification
- EN 1935:2002, hinge grade 13 (200,000 cycles)
- Material
- Extruded aluminum and zinc die-cast
- Installation
- Completely concealed inside flush aluminum profiles; invisible when the door is closed
- Suitable door type
- Main entrance, interior and exterior doors; inward or outward opening, DIN left / right





